Men's Mesa 1/4 Zip Pullover
Men's Mesa 1/4 Zip Pullover - Black - Front
Men's Mesa 1/4 Zip Pullover - Black - Back
Men's Mesa 1/4 Zip Pullover - Navy - Front
Men's Mesa 1/4 Zip Pullover - Navy - Back
Men's Mesa 1/4 Zip Pullover - Retro Blue - Front
Men's Mesa 1/4 Zip Pullover - Retro Blue - Back
Men's Mesa 1/4 Zip Pullover - Sage Green - Front
Men's Mesa 1/4 Zip Pullover - Sage Green - Back
Men's Mesa 1/4 Zip Pullover - Storm Grey - Front
Men's Mesa 1/4 Zip Pullover - Storm Grey - Back
Men's Mesa 1/4 Zip Pullover - view
Free mock-up before you pay Pricing and a measured artwork proof within 1–3 business days. Nothing is printed or embroidered until you approve it.
  1. 1Pick your colour and enter quantities per size
  2. 2Upload your logo and choose where it goes
  3. 3Approve your proof, then we make it
Legend LifeJumperStyle FPR-1M

Men's Mesa 1/4 Zip Pullover

$95.99each
+ GST
Description

Available blank or decorated with your logo (embroidery or print). Add your logo in the Logo Studio.

  • STORMTECH H2X-DRY® Moisture Management
  • UPF rating 50+
  • 1/4 zip front
  • Articulated action shoulders
  • Flatlock seams
  • Low-profile chin saver
  • Contour side panels
  • 100% recycled polyester double texture, 6.93 oz/yd2 (USA) / 235gsm (CDN)
Qty & sizes 0 units total Size guide

Enter a quantity for each size. Change the colour above to add more colours to the same run.

Your logo Add your logo to see it on the garment and get a per-unit price.

The mock-up is a guide only. You approve a real proof before anything is decorated.

Expected despatch2–4 weeks

Estimate only. It assumes you approve the artwork proof on the day we send it (proofs go out within 1–3 business days of your order) and allows 2–4 weeks production from approval. Nothing is produced until you approve the proof.

Low-resolution, blurry or screenshot logos cannot be proofed until we receive a better file (ideally a vector SVG, PDF, AI or EPS), which delays despatch.

Delivery times

Tracked delivery Australia-wide. Working days after your order is despatched:

Metro areas3–7 working days
Regional areas5–10 working days

Remote areas can take longer. Production time (usually 2–4 weeks from proof approval) comes before despatch.

Total units: 0Subtotal: —

Minimum order 5 — mix sizes and colours

Australian owned Logo decoration available Free mock-up before you order

Flat $24.90 delivery Australia-wide.

Size chart

Size chart — Men (cm)

S M L XL 2XL 3XL 4XL 5XL
Chest Width (25mm below armhole, full measure) 49 52.5 56.5 61.5 66.5 72 82 87
Back Length (Centre back neck seam to hem) 66 68.5 71 73.5 75.5 76.5 77.5 78.5
Sleeve Length (CB neck to SP, to cuff) short 89 90 92.5 95.25 96.5 98 98.5 99

All measurements are in centimetres, based on a flat measurement and subject to an acceptable tolerance. Source: Legend Life size chart for FPR-1M.

How to measure (lay the garment flat)
  1. Lay a garment that fits you well flat on a table, front up, sleeves out.
  2. Half chest: measure 2.5 cm below where the sleeve joins the body, straight across from side seam to side seam.
  3. SP length: measure from the shoulder point (where the shoulder seam meets the collar) straight down to the bottom of the hem.
  4. Match both numbers to the chart. Between sizes? Most people go up for a relaxed fit.
Specifications
BrandLegend Life
StyleFPR-1M
TypeJumper
ColourBlack, Navy, Retro Blue, Sage Green, Storm Grey
SizeS, M, L, XL, 2XL, 3XL, 4XL, 5XL
SupplierLegend Life
GenderMen's
Fabric100% recycled polyester double texture, 6.93 oz/yd2 (USA) / 235gsm (CDN)
Features
  • STORMTECH H2X-DRY® Moisture Management
  • UPF rating 50+
  • 1/4 zip front
  • Articulated action shoulders
  • Flatlock seams
  • Low-profile chin saver
  • Contour side panels
  • 100% recycled polyester double texture, 6.93 oz/yd2 (USA) / 235gsm (CDN)
SKULL-FPR-1M-BLACK-S
Decoration

Add your logo with embroidery or DTF printing, both done in Australia. DTF print prices: front logo $12 per garment, back logo $18 per garment. Embroidery prices: front $12 per garment (up to 6,000 stitches), back $20 per garment (up to 15,000 stitches), plus a one-time $59 setup (digitising) per logo. Prices + GST. Dye-sublimated garments are made to order (polyester only), usually 2–4 weeks from the approved design. Upload your logo above or send it with your quote. You get a free proof within 1–3 business days, and nothing is printed or embroidered until you approve it.

Total units: 0Subtotal: —
Men's Mesa 1/4 Zip Pullover$95.99
Complete the kit

Goes well with Men's Mesa 1/4 Zip Pullover

Complete the kit

Goes well with

Pick up where you left off

Recently viewed