JB's WearShirt

JB's FR PPE2 Biomotion L/S Work Shirt

$140.99Prices reducedeach
+ GST
Description

Available blank or decorated with your logo (embroidery or print). Add your logo in the Logo Studio.

  • Classic fit
  • Inherent FR fabric
  • Lenzing cellulosic fiber/modacrylic/aramid/anti-static twill ripstop fabric, 185gsm
  • Modacrylic/cotton FR mesh back yoke for breathability
  • Concealed placket with FR snap button closure
  • 2 chest pocket with pen insert
  • Sleeve gusset
  • Segmented FR reflective tape
  • Complies with Standard AS 4399:2020 for UPF Protection
  • Complies to AS/NZS 1906.4:2023 Class NF and AS 4602.1:2024 Day & Night LEVEL2
  • Certified to ISO EN 11612:2015 Protective - Clothing to protect against heat and flame A1, B1, C1
  • Certified to EN1149-3 :2018
  • Tested to IEC 61482-1-1: 2018 Protective clothing against the thermal hazards of an electric arc (arc flash protection) APTV 8.8cal/cm2 PPE 2
  • Certified to NPFA 2112 UL
Colour
Colour: Orange
Qty & sizes 0 units total Size guide

Enter a quantity for each size. Change the colour above to add more colours to the same run.

Your logo Add your logo to see it on the garment and get a per-unit price.

The mock-up is a guide only. You approve a real proof before anything is decorated.

Expected despatch2–4 weeks

Estimate only. It assumes you approve the artwork proof on the day we send it (proofs go out within 1–3 business days of your order) and allows 2–4 weeks production from approval. Nothing is produced until you approve the proof.

Low-resolution, blurry or screenshot logos cannot be proofed until we receive a better file (ideally a vector SVG, PDF, AI or EPS), which delays despatch.

Delivery times

Tracked delivery Australia-wide. Working days after your order is despatched:

Metro areas3–7 working days
Regional areas5–10 working days

Remote areas can take longer. Production time (usually 2–4 weeks from proof approval) comes before despatch.

Total units: 0Subtotal: —
Australian owned Logo decoration available Free mock-up before you order

Flat $24.90 delivery Australia-wide.

Size chart

Size chart — ADULTS (cm)

XS S M L XL 2XL 3XL 4XL 5XL 6/7XL
CHEST 55 57 59 61.25 63.75 66.75 71.5 74.5 77.5 83.5
CB LENGTH 76 78 80 82 83 84 85 86 87 89
COLLAR 38 40 41.5 43 45 47 49 51 53 55

Garment measurements laid flat, in centimetres. Allow a 5% tolerance. Source: JB's Wear sizing specifications.

How to measure (lay the garment flat)
  1. Lay a garment that fits you well flat on a table, front up, sleeves out.
  2. Half chest: measure 2.5 cm below where the sleeve joins the body, straight across from side seam to side seam.
  3. SP length: measure from the shoulder point (where the shoulder seam meets the collar) straight down to the bottom of the hem.
  4. Match both numbers to the chart. Between sizes? Most people go up for a relaxed fit.
Specifications
BrandJB's Wear
TypeShirt
ColourOrange, Orange/Navy, Yellow/Navy
SizeXS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6/7XL
SKUJBS-6DFRL-ORANGE-XS
Decoration

Add your logo with embroidery or DTF printing, both done in Australia. Embroidery prices: front $12 per garment (up to 6,000 stitches), back $20 per garment (up to 15,000 stitches), plus a one-time $59 setup (digitising) per logo. Prices + GST. Dye-sublimated garments are made to order (polyester only), usually 2–4 weeks from the approved design. Upload your logo above or send it with your quote. You get a free proof within 1–3 business days, and nothing is printed or embroidered until you approve it.

Total units: 0Subtotal: —
JB's FR PPE2 Biomotion L/S Work Shirt$140.99
Complete the kit

Goes well with JB's FR PPE2 Biomotion L/S Work Shirt

Pick up where you left off

Recently viewed